3
QNET HVAC and NI ELVIS II
Setup
The procedure to install a QNET HVAC module on the NI ELVIS II
(+)
is detailed in this section. The NI ELVIS II
(+)
components used in the installation procedure are located and marked by an ID number in Figure 3.1, and described
in Table 3.1.
Caution
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
3.1 QNET HVAC Components
To setup the QNET HVAC system, you need the following components:
1. QNET HVAC PCB (shown in Figure 1.1)
2. HVAC module, attached (shown in Figure 1.1)
3. QNET HVAC power supply (TRUMPower FRA072-S24-4, P/N: TRA72-S24-4G-509L, Output
24
VDC
,
3
A
)
Caution
Use only the power supply provided with with the QNET HVAC.
4. Power cable
5. Schurter
0034
.
3121
,
5
mm
×
20
mm
,
2
.
5
A
,
250
VAC
, time-lag fuse
QNET HVAC - User Manual
10
