Chapter 3
24
QDSP-1000/ 1010 User’s Manual
Step 2:
When a screen similar to that below appears, insert the floppy disk containing the
SATA driver and press S. Then press ENTER to continue SATA driver installation..
Windows Setup
============
Setup could not determine the type of one or more mass storage devices
Installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks form a amass storage
Device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER
S=Specify Addition Device ENTER=Continue F3=Exit
Windows Setup
============
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
ENTER= Continue ESC=Cancel F3=Exit
