Chapter 4
42
KEMF-4010 User’s
Main Menu
The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test
(POST) memory test begins and before the operating system boot begins. Once you
enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main
Menu provides System Overview information and allows you to set the System Time
and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
Table 42 BIOS Main Menu
BIOS SETUP UTILITY
M a i n
A d v a n c e d B o o t C h i p s e t P o w e r S e c u r i t y E x i t
System Date
Mon 06/28/2009]
System Time [10:18:15]
> SATA1
:[Not Detected]
> SATA2 :[Not Detected]
> SATA3 :[Not Detected]
> SATA4 :[Not Detected]
> SATA5 :[Not Detected]
> SATA6 :[Not Detected]
> CF :[SanDisk SDCFB-32]
> System Information
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
<> Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Below table is described for SATA1-6 and onboard CF setting.
Table 43 SATA and onboard CF Device Setting Menu
BIOS SETUP UTILITY
M a i n
A d v a n c e d B o o t C h i p s e t P o w e r S e c u r i t y E x i t
SATA1
Device :Not Detected
LBA/ Large Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T [Auto]
Select the type of device
connected to the system.
<> Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
LBA/ Large Mode [Auto]
Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to
Auto enables the LBA mode if the device supports this mode, and if the device was
