Chapter 2
22
KEEX-6100 User’s Manual
Chapter 2
Hardware Settings
Overview
This chapter provides the definitions and locations of jumpers, headers, and
connectors.
Jumpers
The product has several jumpers which must be properly configured to ensure
correct operation.
Figure 3 Jumper Connector
For a three-pin jumper (see
Figure 3
), the jumper setting is designated “1-2” when
the jumper connects pins 1 and 2. The jumper setting is designated “2-3” when pins
2 and 3 are connected and so on. You will see that one of the lines surrounding a
jumper pin is thick, which indicates pin No.1.
To move a jumper from one position to another, use needle-nose pliers or tweezers
to pull the pin cap off the pins and move it to the desired position.
Содержание KEEX-6100
Страница 19: ...Chapter 1 19 KEEX 6100 User s Manual System Block Diagram Figure 1 Block Diagram ...
Страница 20: ...Chapter 1 20 KEEX 6100 User s Manual Mechanical Dimensions ...
Страница 21: ...Chapter 1 21 KEEX 6100 User s Manual Figure 2 Mechanical Dimensions ...
Страница 59: ...Appendix B 59 KEEX 6100 User s Manual outp 0x2E 0xF0 outp 0x2F 0x81 bit7 WDTRST output is enabled return 0 ...
