4. Connect to the Wi-Fi network
5. Access the internet through the WAN port
You can connect your computer or mobile phone to the Wi-Fi network of
the (LTE) (CUSTOMER PREMISES EQUIPMENT) Access Q3 ROUTER:
• Default SSID: Access Q3.
• Default password: Access Q3-XXXX (where XXXX symbolizes the last 4
digits of the MAC address).
• It is recommended to change the name of your Wi-Fi network (SSID) as
well as your password to avoid unauthorized users to access your
network; this can be referred in section 9.1
• You must reconnect the (LTE) (CUSTOMER PREMISES EQUIPMENT)
Access Q3 ROUTER to the network after changing the SSID and
Wi-Fi password.
Your (LTE) (CUSTOMER PREMISES EQUIPMENT) Access Q3 ROUTER
is for indoor use only.
If you want better performance from your device, please mount it in
the center of the area for better coverage.
You can connect the WAN port of the (LTE) (CUSTOMER PREMISES
EQUIPMENT) Access Q3 ROUTER to the wall mounted Ethernet port by
an ethernet cable, and then choose the working mode to be broadband
and set up the PPPoE / Static / DHCP parameters to access the Internet.
