![background image](http://html2.mh-extra.com/html/qualstar/xls-series/xls-series_installation-manual_3470146217.webp)
XLS Library Installation Manual
15-1
15
Testing the Installation
This chapter provides instructions for the following tasks:
•
Putting the XLS in logical mode. See
Section 15.1
.
•
Bringing the logical libraries online and starting the software applications. See
Section 15.2 on page 15-2
.
•
Ensuring that the installation was successful and that all XLS components and
tape drives are working and communicating correctly. See
Section 15.3 on page
15-3
.
•
Troubleshooting any installation or configuration problems. See
Section 15.4 on
page 15-4
.
•
Backing up the configuration files for the physical and logical library definitions
that are stored on the X
LS’s
system controller. See
Section 15.5 on page 15-5
.
15.1
Putting the XLS in Logical Mode
This section provides information about putting the XLS in logical mode in preparation
for bringing the logical libraries online. In logical mode, one or more software applications
control the library and you interact with X-Link from a logical library perspective.
When you interact with the XLS in logical mode:
•
You can view and control only those resources (cartridge slots, tape drives, and
I/O ports) that have been assigned to a particular logical library.
•
You cannot view or control resources assigned to any other logical library.
•
You specify SCSI element addresses for cartridge slots, I/O port slots, and tape
drives.
•
The logical libraries may be online or offline.
To put the XLS in logical mode, follow these steps:
1. Make sure that all library doors are closed and locked and that the fiducial and
inventory scans have been completed. See
Chapter 14,
“Sc
anning the
Fiducials and Inventory.
”
.
2. If necessary, log into X-Link and press the
Home
button in the upper right
corner of any page to return to the Home page.
Содержание XLS Series
