Qualstar XLS-810160, Руководство по установке

Страница: 63 / 208

5
Installing a MEM
XLS Library Installation Manual 5-9
7. The direction of the bolts is as follows:
– When the MEM is to the left of the LRM (as viewed from the front):
• All six bolts go from the LRM to the MEM
8. From the MEM accessory kit, obtain six 5/16 x 1/2-inch socket head screws and
washers.
9. Insert the screws through their washers and into the holes.
10. Tighten the screws with a 1/4-inch Allen wrench.
5.6 Lowering the Leveling Feet
To lower the leveling feet on the MEM, follow these steps:
1. Locate the four leveling feet on the MEM. See Figure 5-11
Important: If the holes on the MEM do not align with the holes on
the LRM, adjust the leveling feet on the MEM (see
Section 5.6 ).
Figure 5-11 Location of the four leveling feet on the MEM
XLS-85000