Qualstar RLS-4124, Техническое и сервисное руководство

Страница: 84 / 205

5-20 The Private Menu
501510 Rev. S
• Period X
Used primarily for diagnostics, this value represents the period of time that it
takes for the Hall-Effect sensors in the X-Axis brushless DC motor to move be-
tween two points. The maximum value of 65,535 will be shown when the motor
is not moving.
• Z
This value indicates the current position of the Z-Axis motor. The value de-
creases as the picker moves toward the storage slots. When the carriage is all
the way to the backstop, after a successful POST, the position is zero.
• Period Z
Used primarily for diagnostics, this value represents the period of time that it
takes for the Hall-Effect sensors in the Z-Axis brushless DC motor to move be-
tween two points. The maximum value of 65,535 will be shown when the motor
is not moving.
5.4.13 The Private\DriveBay status screen
Private•••••DriveBay
Address: xx
Type: dddddddddd
Rev: ddd.ddddd-ddd
Mode: NORMAL
+24V: dd.dd
Alarm: OFF
+5V: dd.dd
Alarm: OFF
•Alarm Limits
•C1: NONE
•C2: NONE
•C3: NONE
•C4: NONE
•Power Left
•Power Right
The
Private\DriveBay
status screen indicates the status of the Drive Bay board:
• Address
The I 2 C address of the Drive Bay microprocessor.
•
Type
The part number of the Drive Bay microprocessor’s firmware.
• Rev
The revision of the Drive Bay microprocessor’s firmware. Leading zeroes are
suppressed.
• Mode
Normal or Boot modes are possible. Boot occurs during firmware uploading.
• +24V
The +24V supply voltage to the Drive Bay.