Q24/Q48 Tape Library
Installation and Operations Manual
4.
Mailslot Enabled:
Enabling the mail slot in the library reduces the total number of
available storage slots to the library’s maximum slot count, less the
number of mailbox slots.
5.
Auto Clean Enabled:
When auto clean is enabled, the library automatically loads a cleaning
cartridge when a tape drive needs to be cleaned. The library identifies a
tape as a cleaning tape if it has a bar code label that starting with CLN or
after an unlabeled cleaning tape has been loaded into the tape drive.
6.
Select Language:
The select language menu allows the user to specify the language
displayed by the RMU interface. The default display language is English.
Possible alternate language selections are German, Italian, Spanish, and
French. In order for the selection to take affect the desired language
must be selected in the drop down menu and the apply button pushed.
The web screen must then be refreshed.
Changes will only be applied after the <Refresh> or the <Apply> button is selected. After doing so, a
warning page will inform the user of the impact of the proposed change. In some cases, a pop-up
screen will ask the operator to confirm the change. Many changes will also require a reboot.
3.2.7.2
Configuring Logical Libraries
The logical libraries drop down allows the user to partition one library into smaller “logical libraries”.
Each logical library must contain at least one tape drive. For more information on this feature please
see Section 3.3, Partitioning the library.
Figure 41 Logical Libraries
© Copyright QUALSTAR 2015
46
