R
Q40 Quick Start Guide
511036 Rev 01
3
Moving the Bottom Cover Plate
Remove the bottom cover plate from the Base Module
by lifting the front end of the module and using a small
screwdriver to unlock the bottom cover.
Lower the front end of the cover and pull forward to
disengage the cover from the pivot point at the center
of the module.
Install the bottom cover plate to the Expansion Module.
Mounting the Library in a Rack
Note:
When installing multiple modules, you must locate the
bottom of the lowest full U where the lowest module will be
installed and install the bottom most module first.
Locate the 4 adapter blocks and 4 Philips screws in the
accessory box, along with the 2 rackmount rails.
On the front of the rack, mount an adapter block at the
appropriate height to the rack posts.
Repeat step 2 on the rear rack posts.
Mount the Rackmount rails to the adapter blocks.
Place the module at the front of the rack on the support angles
of the rails and push the module into the rack.
