2
PArtS liSt
Fireplace ............................................................................................................... 1
A) Mounting screws ............................................................................................... 2
B) Wall Anchors ..................................................................................................... 2
TOOLS REQUIRED: LEvEL, ELEcTRIc DRILL, DRILL BITS (5/16 Inch (8MM)), PhILLIPS hEAD ScREWDRIvER, hAMMER,
SAFETy gOggLES AnD gLOvES
iNStAllAtiON
Step 1: Select the wall location where you want to hang your electric fireplace heater. Draw a
horizontal line using a level and mark 2 drill holes as shown in Fig. A for the 2 mounting
screws. The 2 screws holes shall be spaced 260mm.
NOTE:
The 2 holes are for mounting of fireplace and it must be level so that the fireplace can
be mounted properly and leveled.
Fig. A
Step 2: Drill 2 holes 5/16in (8mm) on the marked locations. For holes that do not hit stud, use
the supplied wall anchor. Install the wall anchors into the holes and gently tap them into
place with a hammer until the flange of the wall anchor is flush with the wall surface.
See Fig. B
Fig. B
Step 3: Secure the 2 mounting screws into the wall anchor as Fig. c.
Fig. c
Step 4: Mount the fireplace on the wall by the keyhole slots of metal bracket at the back of
fireplace. See Fig. D
Fig. D