background image

RK2 Systems Pump Limited Warranty

RK2 Systems warrants its Pump series of centrifugal pumps to be free of defects in material and/or workmanship at the time of 
purchase. In the event this product malfunctions within one year from the date of purchase, the sole obligation of RK2 Systems 
will be to repair or replace the product. The one year period applies only to pump and motor units used for fresh water  
applications. A one year period applies to pumps used in brackish, saltwater or other suitable applications.

THIS LIMITED WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS AND EXCLUSIONS:

1. RK2 Systems must perform all warranty repairs. Purchaser must retain the purchase receipt and present it with this certificate as 

proof of ownership and entitlement to warranty repairs. Unauthorized repairs will not be compensated by RK2 Systems, and are 
not the responsibility of RK2 Systems. If such repairs damage the product, such damage is not remediable under this warranty.  

2. Problems or damage resulting from failure to comply with instructions in the owner’s manual, improper plumbing and  

positioning, flooding, corrosion or salt build up, incompatibility with fluid chemistry and running unit dry are not covered under 
this warranty. Malfunction for any other reason—including but not limited to misuse, negligence, accident, tampering with 
parts, incorrect wiring, or improper installation—will not be remedied under this warranty. 

3. Purchaser shall bear all shipping, packing, and insurance costs and all other costs, excluding labor and parts necessary to 

effectuate repairs under this warranty. 

4. Periodic check-ups are not covered by this warranty. 

5. This is the sole and exclusive manufacturer’s warranty. Any and all implied warranties, including any warranties of mer-

chantability and fitness for particular purpose, shall have no greater duration than the duration period of the express written 
warranty applicable to this product, and shall terminate automatically upon the expiration of such duration period. Some 
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. No action 
shall be brought for breach of any express warranty subsequent to the expiration of this express written warranty. Except as is 
otherwise provided by applicable law, no action on a warranty implied at law shall be commenced more than one year  
following the date of purchase.  

6. Incidental and consequential damages (specifically including, but not limited to, damages for loss of profits or damages 

relating to down time of people or equipment) caused by malfunction, defect, or otherwise, and with respect to breach of any 
express or implied warranty, are not the responsibility of RK2 Systems, and, to the extent permitted by law, are hereby excluded 
both for property damage and, to the extent not prohibited by applicable law, for personal injury damage. Some states do not al-
low the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 

7. The provisions of this warranty are severable and if any provision shall be deemed invalid, the remaining provisions shall 

remain in full force and effect.  

8. Rights under this warranty are not assignable without the express prior consent in writing by RK2 Systems. Regardless of the 

terms of any consent in writing, the assignees shall have no greater rights than his assignor had against RK2 Systems.  
Any purported assignment without the consent of RK2 Systems shall be null and void. 

9. This contract shall be governed by and in accordance with the laws of the state of California.

10.  This limited warranty is incorporated by reference into the contract of purchase for the products supplied by RK2 Systems to 

purchaser under said contract.  

LIMITED WARRANTY

Содержание RK2









Отзывы: