18
Operation guide
Please read the operating instructions before first use.
Take out the heater from the carton carefully. Please save the carton for storage purposes.
Firmly fix the heater in the desired position by following the installation instructions.
Do not plug other high-power appliances in the same socket as the heater to avoid
overloading.
Switch on
1. Press “ ” to turn the heater on and the screen will display the room temperature. If
the current room temperature is lower than the pre-set temperature the heating
function will begin to operate, and the indicator light will blink.
Lock function
2. Press “Switch” followed by “ ” and the lock indicator light will illuminate.
All keys are invalid when the lock function
Display screen On/Off
3. Press “Display” to switch off display.
Press “Display” again to switch on display
Temperature Setting
4. To set the temperature press “Set” then Press “˄” and “v” to increase or decrease the
temperature by 1
°C. The maximum temperature is 45°C. Once the desired temperature
is set the system will automatically update and return to its normal operational status
where the screen displays the room temperature.
Timing switch setting
5. Press “Set” and the “00”will flash, use “˄” and “v” to set the time. The minimum time
set up is 1 hour and the maximum is 24 hours. Each time you press “˄” or “v” the time
will increase or decrease by 1 hour. When the time is set the system will
automatically
update and return to its normal operational status, however, it will now display the time on
the screen.
Open the window to detect
6. When the temperature reduces by 3
°C or more within two minutes, the intelligent
window detection function kicks in and the heater will stop working. The LED display will
flash and the heater will make a clicking sound. The heater will only resume working
when it is manually reset by hand.
Press “Switch” button an then “Set” in for 5 seconds, the Open Window function is
activated and the display will show “ON”. After “ON” flashes 5 seconds, the display
resume original display
Press “Switch” button an then “Set” in for 5 seconds, the Open Window function is
deactivated and the display will show “OF”. After “OF” flashes 5 seconds, the display
resume original display.
NOTE: The Open Window function is off in factory settings.
Wi-Fi reset setting (with wifi model)
7. When the heater is in operation press “Switch” followed by “וI” within 5 seconds. Then
hold “˄” for 10 seconds and the wifi will reset.
High/Low setting
8. When the heater is in operation press “ וI” to switch between the high and low heating
setting.
Содержание THE-12DW
