5
Step 10: Attach shelves [L] to the unit as shown in Fig. J.
Fig. J
fRONT
Step 11: Attach door handles [P] to Left door and right door [M and N] with door
handle screws [O]. See Fig. K.
Fig. K
Step 12: Attach left and right doors to the unit as shown in Fig. L with 8 door
mounting screws [S].
Fig. l
fRONT
Step 13: Tighten all KD screws.
FirEPlAcE iNSErt iNStAllAtiON
The fireplace insert can be installed after the mantel has been fully assembled.
WARNING: Make sure the fireplace insert controls are in the OFF position and
the unit is NOT plugged in.
Step 1: Carefully place the insert in the unit opening. The front of the insert should be
flush with the front of the mantel. Carefully lift the insert into the mantel until
the top stopper is against the mantel. See Fig. M.
Fig. M
bACk
Step 2: Attach 2 L-mounting bracket [U] to the insert with 2 short KD screws [V]. See
Fig. N.
Fig. N
bACk
Step 3: Move assembled unit to desired location. Unit should not be positioned in area
exposed to direct sunlight.