7
Fig. D
Step 5: Attach top panel [A] to the unit as
shown in Fig E, with 4 KD screws.
See fig. E.
Fig. E
Step 6: Tighten all KD SCREWS.
FIREPLACE INSERT
INSTALLATION:
The fireplace insert can be installed after the
mantel has been fully assembled.
WARNING: Make sure the fireplace insert
controls are in the OFF position and the unit
is NOT plugged in.
Step 1: Carefully place the INSERT in the
unit opening. The front of INSERT should be
flush with the front of the mantel. Carefully
lift the INSERT into the mantel until the top
stopper is against the mantel.
Step 2 : Attach top side of insert with 3 short
KD screws. Attached 2 mounting brackets
[T] at the bottom sides of the insert with 2
medium KD screws. See Fig. F.
Fig. F
Step 3: Move assembled unit to desired
location. Unit should not be positioned in
area exposed to direct sunlight.
WALL ANCHOR SAFETY
CABLE
The use of WALL ANCHOR SAFETY CABLE
is highly recommended in order to reduce
A S S E M B LY I N S T R U C T I O N S
