4
Step 5: Attach panel C to panel E and F with 4 KD screws. See Fig. E.
Fig. E
bAck
Step 6: Attach top panel [A] to the unit as shown in Fig. F with 4 KD screws.
Fig. F
bAck
Step 7: Attach 2 large “L” bracket [K] to panel D with 2 medium KD screws. See Fig. G.
Fig. G
bAck
Step 8: Foam tape (Z1) has been provided to protect your fireplace mantel. Remove the
backing paper from the foam tape.
Step 9: Attached the foam tape to the left and right side flanges of the insert, as shown
in Fig. H. The foam tape shall be spaced about 10 – 15 mm (0.4 – 0.6 in) from
the front edge of the insert.
Fig. H
Step 10: Make sure that the foam tape is completely covering both the side flanges, as
shown in Fig. I.
Fig. i
bAck
