5
6
2
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10mm) diameter
and 1.8" (45mm) depth at the marked locations in the previous step.
drill depth
45mm
(1.8")
drill diameter
ø 10mm
(ø 3/8")
2
Insert the metal expansion anchors (F) and hammer them into the drilled holes. Make sure to leave
a portion of the anchors outside of the concrete. Once the anchors are set, take off the washers
and the nuts on the anchors by using a socket wrench.
Metal Expansion
Anchor (F)
3
Metal Expansion
Anchors (F)
Screws (A)
Align the mounting holes on the vaulted ceiling
adapter with the drilled holes on the ceiling,
insert screws (A) into the mounting holes and
tighten with a socket wrench.
After setting the metal expansion anchors (F)
into the drilled holes, align them with the mounting
holes on the vaulted ceiling adapter. Then place
the washers and the nuts at the end of the anchors
and tighten with a socket wrench.
WOODEN JOIST CEILING
CONCRETE CEILING
Installing the Vaulted Ceiling Adapter to the Ceiling
2
