Screws (F)
M6 Washers
(N)
Mounting to a Wooden Joist or Wooden Stud Ceiling
1a
4
5
Using a power drill and a 5/32" wood drill bit, drill holes of 5/32" (4mm) diameter, and 2.5" (65mm)
depth at the marked locations.
Align the mounting holes on the adapter plate (E) with the drilled holes and then tighten screws (F)
and washers (N) with a socket wrench.
Drill Depth
65mm
(2.5")
Drill Diameter
ø 4.0mm
(ø 5/32")
Adapter Plate (E)
3
4
3
Using wall marking template (B), mark on the center of the stud the locations of where you want to
mount the ceiling adapter.
1
2
3
4
5
6
WOOD JOIST INSTALLATION
use holes 3, 4
STRUCTURAL CONCRETE INSTALLATION
use holes 1, 2, 5, 6
QG-PRO-PM-CA-B or
QG-PRO-PM-CA-W
WALL MARKING TEMPLATE
1
2
For concrete ceiling mounting,
follow step 1b.
NOTE
Using a straight edge, mark the centerline
of the stud.
Using an edge-to-edge stud finder, find the
edges of the stud.
Stud Finder
SKIP TO STEP 2
Depending on the direction of the studs, choose the
mounting holes accordingly.
centerline of the stud
centerline of the stud