Metal Expansion
Anchor (G)
Mounting to a Concrete Ceiling
1b
Using wall marking template (B), mark on the concrete the locations of where you want to mount
the ceiling adapter.
1
Using a power drill and a 1/4" masonry drill bit,
drill four holes of 1/4" (6.0 mm) diameter and
1.5" (38 mm) depth at the marked locations.
Drill Diameter
ø 10mm
(ø 3/8")
Drill Depth
45mm
(1.8")
2
3
4
Insert and hammer the metal expansion
anchors (G) into the drilled holes, then take off
the washers and the nuts on the anchor with
a socket wrench.
1
2
3
4
5
6
WOOD JOIST INS
TALLATION
use holes 3, 4
STRUCTURA
L CONCRETE INS
TALLATION
use holes 1, 2, 5, 6
QG-PRO-PM-CA-B or
QG-PRO-PM-CA-W
WALL MARKING
TEMPL
ATE
Make sure that the drilled holes
are free of dust for proper
installation of anchors.
TIP
After setting the metal expansion anchors (G) into the drilled holes, align them with the mounting
holes on the adapter plate. Then place the washers and the nuts from the end of the anchors
and tighten with a socket wrench.
Metal Expansion
Anchor (G)
Adapter Plate (E)
5
6