Min. Desktop Thickness = 10mm (0.39") / Max. Desktop Thickness = 88mm (3.46")
NOTE
Insert security pin of
desk clamp assembly (C) in
one of the small two holes of
pole (B) to center align them.
NOTE
Insert security pin of
desk clamp assembly (C) in
one of the small two holes of
pole (B) to center align them.
NOTE
Min. Hole Diameter = 10mm (0.39") / Max. Hole Diameter = 75mm (2.95")
NOTE
4
3
10-88mm
1
1
3
2
3
Attach the desk clamp assembly (C)
to the pole (B) with a M10x20mm
screw (G) and tighten the screw using
a 6mm Allen key (J). Peel backing
from the silicon pads (F) and
attach to the desk clamp.
For grommet installation,
disassemble the desk clamp (C) and
select the right parts.
Peel backing from the silicon pads (F)
and attach to the base plate (E).
Insert the adjust screw into
the base plate (E) through the hole and
pad (H). Then tighten the adjust screw
to hold the mount securely.
J
G
C
C
E
H
F
B
B
•
Determine the mounting location, and then place the desk mount over the edge of the desk so that
the clamp fully contacts the desk edge.
•
Turn the knob to make clamp fit to the desk edge, then secure it tightly.
10-75 mm
Pole
Pole
Pad
Desk Clamp
Assembly
Desk Clamp
Assembly
6mm Allen Key
M10x20mm screw
Silicone
Pads
2
E
F
Silicone Pads
Base Plate
Base Plate
Hole
1a
Edge Installation
1b
Grommet Installation