16
17
2. Adjust the handle (E) to the required position and release the unlock button (H). Keep
turning the handle until it snaps securely into place.
Connection to the power supply
1. Double the cord, about a foot from the end, and lead the loop through the hole on the
rear safety hand guard (C) and hook the loop over the cord strain relief (F). Gently pull
on the cord to ensure that it is firmly attached.
E
C
F
2. Connect the plug of the cable to the mains socket.
Operation
Prepare to operate
WARNING!
Before switching on, make sure that all personnel, particularly children and
domestic animals, are at a safe distance. Inspect the hedge to be trimmed, and
make sure there are no obstacles or foreign objects in the work area. If any parts
are missing, damaged or broken, do not operate your hedge trimmer until all
damaged parts have been replaced or repaired. Failure to do so could result in
serious personal injury.
Before starting your hedge trimmer, remove the blade sheath, as shown.
Switch on
Hold the rear handle with one gloved hand. Squeeze the ON/OFF switch. With the other
gloved hand, hold the front handle and grip the safety switch. The hedge trimmer will then
start.
Switch off
To switch the hedge trimmer OFF, release either the safety switch or the ON/OFF switch.
Cutting the hedge
WARNING!
Before using this hedge trimmer, make sure that you have read all of the safety
instructions.
Be aware of the position of the cable at all times. Keep it away from the blade.
When operating the unit, check for the following:
Wear eye protection and appropriate clothing.
Hold the front handle with one hand and rear handle with the other hand.
