manualshive.com logo in svg

Qualcast QGTP25, Оригинальное руководство пользователя

Поделиться
Скачать
Qualcast QGTP25 Скачать руководство пользователя страница 26

26

 Storing the equipment

If you intend to store the equipment for longer than 30 days, the equipment must be 
prepared accordingly; otherwise the fuel still remaining in the carburettor will evaporate and 
leave a rubbery sediment. This can cause problems when starting up the equipment and 
may require expensive repairs. 
Slowly remove the fuel tank cap to release any pres-sure that may have formed in the tank. 
Carefully empty the tank. 
To remove the fuel from the carburettor, start the engine and let it run until the equipment 
stops. 
Leave the engine to cool (approx. 5 minutes). 
Remove the spark plug (see section 10 Change and clean the spark plug). 
Add one teaspoon of 2-stroke engine oil into the combustion chamber. Slowly pull the 
starter cord several times to apply a layer of oil to all internal components. Fit the spark 
plug again. 

NOTE:

 Store the equipment in a dry place and far away from possible ignition sources.

 Putting the equipment back into operation

Remove the spark plug (see section 

Change and clean the spark plug

). 

Quickly tug on the starter cord to remove excess oil from the combustion chamber. 
Clean the spark plug and check that the electrode gap is correct, or insert a new spark plug 
with the correct electrode gap. 
Prepare the equipment for operation. 
Fill the tank with the relevant mixture of fuel and oil (see the section 

Fuel and oil

). 

 Transport

Transportation: 

Due to security reasons please, ensure that the equipment is sent back free of oil and gas! 
Adjusting the idle speed.

Содержание QGTP25































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды