background image

Additional safety instructions

1. Store the machine in a safe place. 
Carefully open the fuel tank cap 
beforehand to release any pressure that 
may have built up in the tank. 
2. Start the machine at least 3 m away 
from the refueling site to avoid the possible 
risk of fire. 
3. Keep the handles dry, clean and free 
from the fuel mixture, oil and grease. 
4. Do not use any fuel other than that 
recommended in the instructions for use. 
Always follow the instructions in the section 
entitled “Fuel and oil”. Never use pure 
petrol, always use the specified petrol and 
oil mixture. Otherwise the machine would 
suffer permanent damage and the 
manufacturer’s warranty would be voided. 
5. Do not use the machine without the 
silencer and/or screen for the silencer. 
6. Never touch the silencer after you have 
used the machine. Leave the machine to 
cool down for a while before carrying our 
maintenance or adjustment work. 
7. Do not use the hedge trimmer near 
inflammable liquids or gases. This could 
result in an explosion and/or fire. 
8. Switch the machine off before you 
place it on the ground. 
9. Check all screws and seals at regular 
intervals to ensure that they are tight and 
tighten them if necessary. Never use the 
machine if it has not been properly 
adjusted or has not been fully or safely 
assembled. 
10. Always clear items such as bottles, 
stones, etc. away from where you are 
working. Catapulted items may cause 

serious injuries to the user or people nearby 
and may also damage the machine. If 
you strike an item by accident, switch off 
the machine immediately and check it. 
Never work with a damaged or broken 
machine. 
11. Do not modify, remove or add any 
things to any components of this 
machine. This could cause injuries or 
damage the machine and void the 
manufacturer’s warranty.  
12. Do not use the machine when you are 
tired or for lengthy periods without breaks. 
13. Do not use the machine if you have 
consumed alcohol, drugs or strong 
medication.  
14. Always hold the machine with both 
hands so that your fingers and thumbs are 
hooked around the handles.  
15. Only use the machine outdoors. 
Exhaust fumes are toxic.

Helpline No. UK 0151 649 1500 / IRE 189 094 6244

04

Содержание QG-PH2652
















Отзывы: