18
Customer Helpline
0845 077 8888
Maintenance
Blade Maintenance
Switch off and remove the plug from the mains.
Removing the blade and fan. USE GLOVES.
•
To remove the blade bolt , hold the impeller firmly and with the spanner provided loosen
the blade bolt .
•
Remove the blade bolt , blade , spacer and impeller .
•
Inspect for damage and clean as necessary.
Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner-regardless
of condition. If the blade is cracked or damaged replace it with a new one. Never use a blade
bolt if the insulated head is damaged cracked or missing.
Fitting the blade and impeller. USE GLOVES.
•
Ensure the impeller is located correctly.
•
Place the spacers
16
onto the fan ensuring the pegs have located into the holes
•
Ensure the pegs have located into the holes on the blade and that the blade is positioned as
illustrated in figure 6.
•
Place the blade bolt through the centre hole of the blade.
•
Tighten down clockwise by hand.
•
Hold the impeller firmly and tighten the blade bolt with the spanner provided.
13
17
15
14
16
14
14
17
10
14
15
16
17
17
14