14
13
Customer Helpline
0345 077 8888
•
The top, curved handle section
5
is assembled to the bottom handle supports
10
using a
bolt, washer and quick release lever
6
on either side. Adjust the height to suite the operator as
necessary by inserting the bolt into the required holes on the handle (2c).
•
Hold the curved handle in the desired operating position (fig 2c). Fix the handle in this position
by tightening (clockwise) the quick release levers then fold them against the handle. These levers
should be folded in towards the handle using moderate force to lock them in position. When
locked there should be no play between the top and bottom handle assemblies.
To tighten
, unfold these lever, turn them clockwise, then fold them back (2d).
To loosen
, unfold these levers, turn anticlockwise, then fold them back in (2d).
Several adjustments may be needed to find the correct setting. Do not force.
Step 2 - Top Handle Assembly
Assembly
5
6
10
6
2c
2d
