background image

12

13

Intended Use

 

This machine may only be used outdoors for cutting wood and in combination with the 

original cutting chains. This machine is not designed for heavy-duty or commercial use.

Any use of the machine that deviates from its intended use, and is not included in these 

instructions, is considered unauthorised use and relieves the manufacturer from his or her 

legal liability.

Warning Symbols

Before any use, refer to the corresponding paragraph in the manual.

This symbol, before a safety comment, indicates a precaution, a warning 

or a danger. Ignoring this warning can lead to an accident for yourself or 

for others. To limit the risk of injury, fire, or electrocution, always apply the 

recommendations indicated.

Conforms to European standards.

The exhaust gas is poisonous and asphyxiating. If inhaled, it may even be lethal. 

Do not operate the engine in closed or poorly-ventilated places.

Petrol and petrol vapours are extremely flammable.

Do not touch to prevent burns.

Wear hearing protection and eye protection (PPE) when using the device.

Wear robust footwear when using the device.

Wear protective gloves when using the device.

Guaranteed sound power level data (115dB), in accordance with Directive 
2000/14/EC.

Beware of kickback (recoil).

Avoid contact with the tip of the guide bar (chain return point). This will result in 
kickback of the chainsaw.

Do not hold the saw with one hand.

Hold the saw firmly with both hands. Place your right hand on the rear handle 
and your left hand on the front handle.

Do not start or use the equipment close to people (especially children) or 
animals. During operation, it is recommended that a minimum distance of 10 
metres from other people is maintained.

115

Содержание 310099



















Отзывы: