page 14
Appendix E
Pro9 table service (Q-P9BSTS)
The Pro9 system can be configured to support two drive-thru order points and one
table service channel (TS). If the restaurant is using table service, you will require a
Table Service Base Station. The table service base connects to the drive-thru base
station using a Cat5 cable and uses its own 48v power supply.
The table service base station is located in the seating area of the restaurant
because that is where the coverage is required. Usually, pick a location for the
base somewhere between the service counter and the entrance. If there are
multiple floors adjust your placement accordingly and consider adding one or
more repeaters.
1. Install a Cat5 cable from the drive-thru base station to the position you have identified for the table
service base station. Once installed use a Cat5 tester to ensure that the cable is fully wired and tested.
2. Mount the table service base station using the template provided as a guide for the screw locations.
3. Plug the Cat5 cable to the ‘IN’ port of the table service base station.
4. Return to the drive-thru base station and disconnect the power.
5. Plug in the new Cat5 cable to the ‘OUT’ socket located on the top of the drive-thru base station.
6. Plug the power back into the drive-thru base station and table service base station.
7. After successful start up the LED on the TS base station will be solid amber.
8. Press the ‘–’ and the ‘
*
’ buttons of the headset together for 2 seconds, the boom LED will pulse
yellow, you can then let go of the buttons. You are now in table service mode.
9. Testing. Repeat Step 8 with another headset. Then,using the page ‘
*
’ button on one of the
headsets, the two headsets will communicate between each other.
10. The table service channel is simplex which means you push to talk and release when you’ve
finished speaking. When speaking the boom LED will be solid white.
11. To change your headset from table service to drive-thru press ‘I’ and ‘–’ . The boom LED will change
from pulsing amber to pulsing green.
Figure 19 - Table
service base station
Figure 20 - Connect table service base
station to drive-thru base station
