
QuadroE1/T1 Manual I: Installation Guide
Hardware Overview
QuadroE1/T1; (SW Version 3.2.x)
7
Hardware Overview
QuadroE1/T1’s Rear Panel
Fig. I-1: QuadroE1/T1's backplate
1
Power supply socket. Use only the power adapter delivered with the QuadroE1/T1.
2
PHONE socket with a RJ-11 connector enables connectivity of a regular analog tele-
phone. This is a FXS (Foreign Exchange Station) analog port.
3
RJ-45 socket to attach the Local Area Network (LAN) via an Ethernet CAT 5 cable. If a
PC is connected directly to this socket, a straight cable is used. If an Ethernet hub,
router or switch is used, a crossover cable may be required.
4
RJ-45 socket to attach the Internet Uplink (WAN) via an Ethernet CAT 5 cable.
5
RJ-45 socket to attach the E1/T1 trunk. See
Appendix: Pin Assignment of E1/T1.
6
The Reset button may be used in two ways: (1) to initiate a normal reset, (2) to carry
out a factory reset. A normal reset is executed by pressing the Reset button with a pa-
per clip for an instant.
Pressing the reset button and holding it down for 7 seconds or more will execute a fac-
tory reset. This will restore the factory defaults and clear all settings including the IP
address and the administration password you entered.
Please Note
: A Factory Reset forces the default LAN IP address of 172.30.0.1 and
default administrator's password of 19.
Содержание QuadroE1/T1
Страница 1: ......