Quadro PGS-H2024, Руководство пользователя

Страница: 7 / 24

ENGLISH
At the end of the ironing session:
By pressing switch (4) (5) with the plug inserted into the wall socket the appliance remains
energized. Press steam button (10) to let out all the residual steam. Turn off the appliance by
pressing button (4) (5). Unplug the power cord from the wall socket. Let the iron cool down by resting
it on the stand. When putting away the appliance, make sure that the power cord and the electric
cables do not touch the hot parts.
A normal iron generates only a small amount of steam. In this case it is necessary to produce steam
constantly in order to eliminate crease in the fabric being ironed. A professional ironing system works
rather differently. The fabric is first made damp by the steam and then, in the second phase, dry-
ironed in the normal way. This means that every tiniest crease is removed and your garments are
ironed to perfection. In the first phase (steam-damping of the fabric), hold the iron about 20 cm
above the fabric and press the steam (10). Pass the iron over the garment in a circular movement so
that the powerful jet of steam damps the fabric. Lightly creased garments require only a few
moments of steaming. While very heavy fabrics or garments with particularly difficult creases must
be damper, so steam must be applied for a few more seconds. During the second phase (dry
ironing), check that the thermostat knob is in the correct position for the type of fabrics; release the
steam button(10) and dry-iron the garment. The special ironing plate will prevent the fabrics from
becoming shiny. Using this ironing technique, and following the suggestions in the chart above, you
will find it easy to give your garments a really professional ironing finish.
Before cleaning the iron, disconnect it from the power supply and allow it to completely cool down on
the iron stand (8).
NEVER IMMERSE THE APPLIANCE IN WATER OR OTHER LIQUIDS.
Clean the boiler tank every three months by carrying out the following the procedure:
• unplug the iron from the wall socket;
• fill the boiler tank with normal tap water, rinse and drain;
• clean the appliance using a wet cloth.
.
Type of appliance: Steam iron
Model: PGS-H2024
Voltage: 220-240V, 50Hz
Power consumption (total): 2200W
Iron: 850W
Boiler: 1350W
Soleplate: Stainless steel
Soleplate size: 243x120mm
Capacity of boiler: 1.2L
Pressure: 2.5-3.0 Bar
How to get a professional ironing finish
Cleaning
Technical data
Environmentally-friendly treatment
.
According to the EU Directive No 2002/96/EC concerning the products labeled with a symbol of a
crossed trash can, the manufacturer warns that this product cannot be considered a standard domestic
waste. By proper treatment, management and recycling of such waste the owner of the product prevents
users from the potential negative consequences to health, which may be caused by
inadequate management ordisposal of such waste. For more information concerning
recycling and management of the product, please contact your local government office for
dangerous waste management, or the vendor from which you purchased the product. Waste
electrical products must not be dispose with household waste. This equipment should be
taken to your local recycling centre for safe treatment.
- 6 -