Quadro MQ-D88 SENIOR, Руководство пользователя, Страница: 17 / 76

• After the charging is over, disconnect the AC power socket from the phone
and the charger.
Note:
• During charging, make sure that the phone is placed in a well-ventilated
environment with temperature of +5C~+40C and a charger provided by
the phone manufacturer is used. The use of an unauthorized charger may
result in danger and a violation against the acceptance and maintenance
regulations for the phone.
• When the mobile phone switches off automatically or displays the warning
phase of "low power", be sure to charge the battery in time. If the battery is
not used up, the phone will reduce the charging time accordingly.
• The standby and call duration of the phone provided by the manufacturer
are based on the ideal working environment. In actual use, the working
duration of the battery will vary due to different network situation, working
environment and application mode.
• During charging, make sure that the battery has been installed properly
because the battery being charged cannot be removed.
As a safety
precaution, the battery stops charging before it overheats.
• After the charging is over, please disconnect the charger from the phone
and power socket.
• If you don't disconnect the charger from the phone and the power socket,
after certain time (about 5~8h), when the battery power is consumed to
certain degree, the mobile phone will start charging. Doing so is not
recommended, because it will affect the performance and service life of
your battery to some extent.
3.3 Network Connection
SIM Card
• Before the use of the mobile phone, you must insert valid SIM card(s) into it.
The SIM card is your key to enter the digital GSM network.
• All information in connection with network connection and your log list
initializations are recorded on the metallic plane area of the SIM card in
addition to the names, phone numbers and short messages stored and
received in the phonebook of the SIM card. The SIM card can be taken out
freely from your mobile phone and placed into any GSM mobile phone for
use.
• In order to prevent the information being lost and damaged, avoid touching
the metallic plane area of the card and keep the SIM card away from
ENGLISH
- 13 -
3. BEFORE USING THE UNIT