Quadro DECT-4200, Руководство пользователя

Страница: 5 / 60

Connecting the charging station
Connect the charging station to the mains. Ensure access to the power
adapter plug is not obstructed by furniture or such. (Only applies to
telephone sets with at least two handsets)
Inserting the batteries
Open the battery compartment cover. Put in the batteries. Close the
battery compartment cover.
Attention: Use only type AAA NiMH 1.2 V / 450 mAh rechargeable
batteries. Never use normal batteries / primary cell batteries. Observe the
correct polarity!
Charging the batteries
Before the handset is used for the first time, insert it in the base station
/ charging station for at least 16 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. The battery status is shown on the display.
When the battery capacity is nearly exhausted, the battery symbol will
flash in the display.
End your call and place the handset into the base or charging station for
charging.
After a short time, the battery symbol will appear to be fully charged but
this is actually not the case. The battery capacity will decrease rapidly. We
advise you to put the handset on the base unit for 12 hours so that it can
be recharged completely.
Setting the Language*
☞ In delivery state the language is set to “English“.
… press, select HANDSET using and press
/ Select LANGUAGE and press
Select a language and press
* Option, not available in all models
☞
/
/
3
OK
OK
OK
OK
ENGLISH