Quadro CTV-37D10 TXT, Руководство по обслуживанию

Страница: 27 / 35

Operation Instructions
26
- -
OPERATION INSTRUCTIONS
PICTURE TIME TUNE
MENU BUTTON
1.Press this button to select PICTUREc yc lic a lly.m e n u T IM E S E T U P T U N E E X C H A N G E
¡ ¢ ¡ ¢ ¡ ¢ ¡ ¢
2.After entering into each menu, you can select submenu which you will adjust with PROG.+/- Buttons or
(GREEN) /BLUE buttons. Then you can adjust it with VOL.+/- Buttons or the +(RED) / - (YELLOW).
Picture Button
EXCHANGE
*HUE is displayed only for NTSC system.
1.You can select the
CONTRAST.BRIGHTNESS.COLOUR.SHARPNESS.HUE.
BLACK STRETCH item by pressing PROG+/- buttons or (GREEN) /
(BLUE) buttons.
2.You can adjust the
CONTRAST.BRIGHTNESS.COLOUR.SHARPNESS.HUE.
item by press VOL+/- buttons or (RED) / (YELLOW) buttons.
3.You can set the BLACK STRETCH.COMB FILTER item ON or OFF by
pressing VOL+/- buttons or (RED) / (YELLOW) buttons.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
HUE
BLACK STRETCH
PICTURE
25
25
25
25
0
OFF
SETUP
WARNING: The main power switch ( of the control location page ) is the manually operated
mechanical switc . The remote control can not cut off power supply to the TV set. For safety purpose,
push main switch to the OFF position and make sure the power indicator go out when not use for long
time. Push the power "ON/OFF"switch to the ON position, and then power indicator will light up, the
picture(or blue screen) will appear within a few seconds.
No.1
h