Quadro CJ-800G, Руководство пользователя

Страница: 4 / 16

2. Remove the lid; put the juice tank and juice sieve on the motor base, then
select the appropriate juice cone and insert on the motor spindle.
3. Slice the citrus fruit (such as oranges, lemons, grapefruits etc.) in half. Push
up the drain; press the fruit down lightly and the juicer will automatically begin
the juicing process. For best results, adjust the hold on the fruit to ensure that
all parts of the flesh are squeezed.
4. Place a suitable glass under the drain and then press down the drain, let juice
drain out from spout; push up the drain to prevent dripping and spilling of juice
until up to desired capacity.
5. After finishing, unplug the juicer; disassemble and clean the juice cone, juice
sieve and juice tank. Please refer to the section on “CARE AND CLEANING”.
For detail.
Note: Do not let the appliance to operate more than 5 minutes
continuously. Let the appliance to cool down 5 minutes before continue
operating the appliance
Maintenance
Switch off at the power outlet and then unplug power cord.
Disassemble the unit and wash all removable parts in warm, soapy water. Do not place these parts in the
dishwasher as the harsh detergents and high water temperature will discolor and distort these parts. It is best to
rinse or wash all removable parts immediately, as dried citrus pulp is difficult to remove and may stain. Dry all parts
thoroughly after washing and rinsing them.
Wipe the motor base with a damp cloth. Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning
as these may scratch and damage the unit.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
Technical Data
Main Supply: 220-240V~50Hz Power: 40W
Continuous running time: Max 5 min.
Do not let the appliance to operate more than 5 minutes continuously. Let the appliance to cool down 5 minutes
before continue operating the appliance.
Caution: Do not put excessive pressure on the Juice Cone: if the motor starts
getting louder or the speed of the motor decreases significantly, there is too
much pressure being exerted on the cone
- 3 -
ENGLISH