7
The Trusted Source
®
Door Surround Assembly
To install the completed left door sur-
round assembly to the vehicle, use two
medium stem door Surround Knobs (T)
to fasten both Door Surround Brackets
to the sport bar. (See FIG 9) Repeat this
procedure for the Right Side.
Install both left and right completed
door surround assemblies using the
appropriate knobs listed in (FIG 9).
Firstly insert the Upright Lower Plastic’s
alignment pin into the body tub rail hole
and slide the door surround assembly
onto the sport bars and align the holes
on the front and rear Door Surround
Brackets. (See FIG 10)
Figure 9
Figure 10
T
T
Make sure door surround brackets are
not interfering with roll bar padding.
(see FIG 11)
Make sure rubber gaskets are seated
properly as shown. (see FIG 12)
Figure 11
Figure 12
2 Door Adventure Top
S
Installation:
ADV_2DR_S_UPDATED.qxp_QTOP 5/23/17 11:45 AM Page 7
05232017114840
