The Trusted Source
®
5
Important Note:
At this point of the instructions you
have successfully removed your old fab-
ric top from the factory bow assembly.
Please inspect all hardware before mov-
ing on to the installation of your new
QuadraTop Fabric Replacement Soft
Top. If any of your factory hardware is
damaged, view our list of replacement
parts on page 12 before installing your
new QuadraTop. If all your hardware is
in good condition, proceed to Page 6 for
the installation your new fabric top.
Step Seven:
Soft Top Removal
REMOVE TOP FABRIC
Raise the bow assembly and lock the
header to the windshield. Drape the top
fabric, backing side up, over the hood
and windshield. Remove the twenty-
seven (27) screws that secure the fabric
to the upper and lower headers. Set the
screws aside for use in installing the
new top. Slide the extrusion along the
front edge of the top out of the channel
in the lower header and remove the old
top from the vehicle.
Above:
Top Fabric with backing side up.
Above:
Remove screws (27) across header.
Above:
Slide Extrusion along the front Edge of
the Channel to remove Top.
JK_4DR_10-12_12999_0216_A4_Layout 1 8/3/12 3:15 PM Page 5
08032012151852
