Quadratec QRC, Руководство по установке, Страница: 3 / 8

The Trusted Source
®
3
Installation Hardware:
YOU CAN IDENTIFY THE LEFT AND RIGHT HAND PIECES BY LOCATING
THE QUADRATEC LOGO. THE LOGO SHOULD BE AT THE FRONT OF
EACH SIDE.
YOU MUST REMOVE ANY FACTORY INSTALLED “ROCK RAILS”,
SIDE STEPS OR RUNNING BOARDS BEFORE INSTALLATION OF
YOUR NEW SIDE ARMOR GUARDS.
PARTS LIST:
Driver (Left) Rocker Guard QTY 1
Passenger (Right) Rocker Guard QTY 1
Driver (Left) Suppor t Bracket QTY 1
Passenger (Right) Suppor t Bracket QTY 1
Hex Bolts:
A) M10 x 30 mm bolts QTY 2
B) M8 x 35 mm bolts QTY 6
C) M6 X 25 mm bolts QTY 12
Nylon Lock Nuts:
D) 10mm nylock nut QTY 2
E) 6mm nylock nut QTY 12
PARTS LIST:
Flat Washers:
F) 10mm flat washer QTY 4
G) 8mm flat washer QTY 6
H) 6mm flat washer QTY 24
Lock Washers:
I) 8mm lock washer QTY 6
Required Tools:
Safety Glasses
10mm, 13mm, 16mm & 17mm
Sockets with Ratchet Driver
10mm & 16mm Wrenches
A E C B D
Driver Side
Support Bracket Passenger Side
Support Bracket
F G H I
QRC_SIDE_ARMOR_JL4dr_12004_3214.qxp_Layout 1 1/16/19 4:40 PM Page 3