Step Three: Install Mirror Head
Install the Mirror head depending upon
round or square design. Tighten the
round mirror head with a 12mm wrench
on the bolt head and an 11mm wrench
on the mirror barrel. Tighten the square
head design with two 12mm wrenches
on the jam and acorn nuts.
The tension of the mirror head can be
adjusted using the 3 phillips head
screws on the backside of the mirror.
DO NOT OVER TIGHTEN. The mirror
should not be so tight that it cannot be
adjusted. Adjust mirror then check and
snug all fasteners. Repeat steps for the
passenger side mirror.
Round Head Mounting
12mm
11mm
Square Head Mounting
12mm
Q_ADV_MIR_13111_040X.qxp_A4 4/14/16 4:07 PM Page 3
04142016160823
