The Trusted Source
®
Quadratec
®
Aluminum
Cargo Receiver Rack
Assembly & Installation Manual: for 2” Receiver Hitches
#
12033.1003
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUC-
TIONS AND PROCEDURE
NOTICES
BEFORE ATTEMPTING TO
INSTALL OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS
AND WARNINGS WITH PRODUCT & VEHICLE OWNERS MANUAL.
REGARDING RECEIVERS: SEE PAGE 2 FOR URGENT RECEIVER
CAPACITY WARNINGS. DO NOT ALLOW RECEIVER MOUNTED
ACCESSORIES (RACKS, ETC.) TO BLOCK VEHICLE MIRRORS
OR LIGHTS. READ AND UNDERSTAND ALL CAPACITY WARNINGS.
RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT
ALL TIMES WHILE INSTALLING OR MAINTAINING THIS PRODUCT.
TORQUE AND RECHECK FASTENERS AFTER 250 MILES AND
FREQUENTLY THEREAFTER. INSPECT BUMPER AND MOUNT
BEFORE USE. DO NOT USE IF DAMAGED.
CHECK STATE AND LOCAL HIGHWAY SAFETY LAWS REGARDING
PERMITTED HITCH MOUNTED ACCESSORIES
PARTS LIST:
2” Receiver Tube Assembly - QTY 1
Cargo Basket - QTY 1
M10 Carriage Bolts - QTY 4
M10 Nylock Nuts - QTY 4
Reinforcing Plates - QTY 4
PARTS LIST:
Cotter Pin - QTY 1
5/8” Hitch Pin - QTY 1
REQUIRED TOOLS:
Safety Glasses
17mm Wrench or Socket
Q_ALUM_RACK_12033_1003_4PG.qxp_Layout 1 10/17/19 11:05 AM Page 1
