The Trusted Source
®
3
Put on safety glasses. Align mounting
holes on the ends of the Right and Left
rack halves (B) with the mounting holes
along the sides of the Main Tube (A).
Fasten the Rack Halves to the Main
Tube using the M10 Bolts (G), Washers
(H), and Nylock Nuts (I).
Set the Cross Brace (C) over the Rack
Halves (B) and fasten the Cross Brace
to the Halves using the M8 Bolts (E),
Washers (F), and Lock Nuts (G). Attach
the 2” Receiver Tube (J) to Main Tube
(A) with the remaining M10 Bolts (G),
M10 Washers (H), and Nylock Nuts (I).
Use 13 & 14mm wrenches or sockets to
tighten the M8 bolts, and two 17mm
wrenches or sockets to tighten the M10
Bolts securely. Finally, insert the End
Cap (K) into Main Tube (A).
Compact Cargo Rack Kits Contents:
E
F
C
D
K
G
G
H
I
J
A
B
B
PARTS LIST:
A) 2” Main Tube
QTY 1
B) Cargo Rack Halves
QTY 2
C) Cross Brace
QTY 1
D) M8 x 35 Bolt
QTY 2
E) M8 Washer
QTY 4
F) M8 Nylock Nut
QTY 4
G) M10 x75 Bolts
QTY 6
H) M10 Flat Washer
QTY 12
I) M10 Nylock Nut
QTY 6
J) 2” Receiver Tube
QTY 1
K) Plastic End Cap
QTY 1
Hitch Pin & Cotter Pin
One Each
Note: Only finger tighten bolts until
Carrier is fully assembled.
REQUIRED TOOLS:
Safety Glasses
17mm Wrench & Socket
13mm Wrench or Socket
14mm Wrench or Socket
Assembly Instructions:
Q_RACK_COMPACT_12033_1000_Layout 1 11/13/14 10:15 AM Page 3
11132014101603
