quadral AURUM Series, Инструкция пользователя

Страница: 4 / 25

CENTER
FRONT
TV
FRONT
SUBWOOFER
REAR
REAR
50 cm
>–
6
EN
7
CONNECTIONS / OPERATING ELEMENTS
1 Service interface. Do not plug-in anything!
2 WPS/Update button
3 Network connection RJ45
4 Standby button
5 De-Association button - Reset of the radio bridge
6 TosLink - Digital Input
7 Power switch - completely disconnects the device from the mains supply
8 Mains socket
9 Reset button streaming module
10 USB port - for USB mass storage (USB stick, external hard disk)
11 Analogue In - stereo inputs, Cinch unbalanced
12 Analogue In - stereo Inputs, XLR balanced
COMMISSIONING
1 First download the “AURUM Player” App for Android from the Google Play™ or for iOS from the Apple
iTunes® App Store.
Apple iTunes® Google Play™
2. Make sure that the power switches of both speakers are turned off.
3. Connect your feeders, if available.
4. Connect the active loudspeakers to the mains with the supplied mains cables.
5. Now switch on the speakers with the power switch on the back.
6. Network integration
A cable connection to the network is the most stable and powerful type of connection.
LAN cable:
Connect the speaker to the network using a network cable. The network connector (3) is located on the
rear panel. The loudspeaker should be immediately on the network.
WLAN via WPS:
Activate the WPS function of your router. Now press the WPS button (2) on the back of the master
loudspeaker (left). The loudspeaker will now automatically connect to your WLAN network.
WLAN via App:
Switch on the loudspeaker. After approx. 3 minutes a WLAN access point opens. Connect your
smartphone/tablet to the loudspeaker network and open the “AURUM Player” App. The loudspeaker
should now be visible on the start page, the device list. Press the device in the device list and scroll
downwards to “Settings” on the new page.
At the top of the settings page is the “Network Wizard”, click on it and turn to “WLAN”. Here click on “Scan”,
now the entire environment will be scanned for WLAN networks. Select your network, enter the network
key at “Password” and press “Connect”.
Now you have successfully connected your AURUM active speakers to the network.
In order to be able to operate the loudspeaker via APP, your device has to be connected to the same network
to which the loudspeaker has been integrated!
1
9
2
10
3
11
12
4
5
6
7
8
SERVICE ONLY !
WPS / UPDATE STREAMING MODUL
POWER STREAMING MODUL
LAN
RESET STREAMING MODUL
UPDATE FINISHED
USB
Analog IN
Right
Left
TOSLINK Balanced Unbalanced
ON
STANDBY / ON
STANDBY
LINK
DE-ASSOCIATION
ASSOCIATION
OFF ON max. Power Consumption 650 W
Fuse
115 V / T 6,3 A L 250 V
230 V / T 6,3 A L 250 V