TROUBLESHOOTING GUIDE
The system will not power on (there is no lights lit on panel)
Check to make sure the 6 pin connecter is plugged tightly into the sensor
The red wire in that 6 pin connector is still connected to the battery
The Black wire is still ground tightly
The system lights are on but nothing works when pressed
Check to make sure the 14 pin connecter is pushed into the back of the sensor
Check to make sure the all other wire harness are pushed tightly into the sensor
Check to make sure the wire harness is pushed into the back of the panel
Check your battery’s to see if they have a good charge
System power cable un hooked at battery
The front cylinders run but will not do anything in auto mode
Check all connections at the control panel and sensor
The rear Cylinders are not in the all up position
The system operates but is moving very slow
The battery does not have at least 10 volts of charge
The system battery cable has bad connection or corrosion
The system says it is level but it is not level
The spot you are trying to level in may be to out of level for the system to handle
There may have been movement in the coach during leveling process
The system may need to be reprogrammed (contact us or a dealer)
If you still need help please call
1-800-752-9815
