Quadra-Fire • LOGS-QFI35FB Log Instructions • 2223-935 Rev. D • 5/18
2
Log #4 (SRV2223-706)
: Position Log #4 as shown in Figure 9. See Figure 2 and Figure 8 for additional references. Mate
the slot located at the left end of log #4, shown in Figure 8, with the right log pin. Rotate the right end of the log clockwise,
until the log contacts the grate bar.
Figure 8. Log #4 - Bottom View
Figure 9. Place Log #4 (Glass Rock not Shown)
MATE LOG PIN
WITH LOG SLOT
Figure 11. Place Log #6 (Glass Rock not Shown)
4
Figure 6. Log #3 - Bottom View
Log #3 (SRV2223-702)
: Position Log #3 as shown in Figure 7. See Figure 2 and Figure 6 for additional references. Mate
the grate tine groove with the base of the left grate tine. Slide the log forward until it stops against the vertical portion of the
left grate tine. Mate the burner top groove with the left edge of the burner top as shown in Figure 7.
GRATE TINE GROOVE
FRONT
BACK
BURNER TOP GROOVE
Figure 7. Place Log #3
3
3
LOG PIN SLOT
LOG CONTACTS
GRATE BAR
5
3
1
2
Figure 10. Place Log #5 (Glass Rock not Shown)
RIGHT
LEFT
REST ENDS OF LOGS
ON THE FLAT SPOTS
6
Log #5 (SRV2223-704)
: Position Log #5 as shown in Figure 10. See Figure 2 and Figure 7 for additional references. Rest
the left end of the log on the flat spot of log #3. Locate the groove located on the right end of the log. Mate the groove with
the grate bar. Use the left log pin to positively locate the right end of the log.
Log #6 (SRV2223-705)
: Position Log #6 as shown in Figure 11. See Figures 2, 5 and 10 for additional reference points.
Place the front and back ends of the log on the flat spots as shown in Figure 11.
FLAT SPOT
FOR LOG #5
FLAT SPOT
FOR LOG #7
FLAT SPOT
FOR LOG #6
USE LOG PIN TO
LOCATE LOG
LINE SHOWS BACK
EDGE OF GRATE BAR
LOG #3 TOUCHES
GRATE TINE
MATE GROOVE WITH
CORNER OF BURNER TOP
4
REST LOG ON
FLAT SPOT
