Page 24
Quadra-Fire • GARNET-T • 7016-127 Rev. i • 12/11
FIG. A 90 DEGREE ELBOW
FIG. C MINIMUM CLEARANCE
Figure 5.33
FIG. B 45 DEGREE ELBOW
CENTER LINE
TRIM RING
HEAT SHIELD OVER
TOP HALF OF PIPE
TERMINATION CAP
WALL THIMBLE
MINIMUM OF 6 IN. (152 MM) OF PIPE THROUGH WALL
INTERIOR WALL 2 IN. (51MM) CLEARANCE
FROM REAR OF STOVE
90° ELBOW
PIPE LENGTH
PIPE LENGTH
center line
TRIM RING
SOLID OR
VENTILATED
TERMINATION CAP
Place mark where protrudes through
exterior wall to cut off excess
Use HEAT SHIELD or WALL THIMBLE
45° Elbow
2 in. 951mm) Clearance from stove
corner to combustible wall.
2 in. (51mm) Clearance
from stove corner to
combustible wall
HEAT SHIELD
OVER PIPE
TRIM RING
NOTE:
Wall Thimble removed
to show Heat Shield
