Quadra-Fire • Fogata Grande
6) With the valve control box under the edge of the bowl,
connect the pilot tube in the hole as shown in picture.
The stainless steel flex connector is to be connected to the
brass elbow located on the top of the valve control box.
The piezo ignitor lead is to be connected to the ignitor lead
coming out of the valve control box.
7) Feed the thermopile up through the oval hole in the bowl
and insert it into the open hole in the pilot assembly. Ensure
that the thermopile snaps into place and is securly in posi
-
tion to ensure proper connection.
Figure 5
8) Replace leg “A” under the Fogata Grande bowl and se
-
cure the valve control box on the two screws previously in
-
stalled in step 3
9) With all the gas componets now securly in place, take
the lava rock supplied and spread it over the screen so that
it covers the sides of the burner but ensure it does not cover
the top of the burner in order to ensure proper flame
10) Log Instalation and placement instructions for the log set
are provided with the log set
Thermopile
