Page 13
1 May, 2019
7038-201G
Page 2
7038-201G
19 January, 2018
5700 Step Top ACC Wood Burner
Hearth & Home Technologies welcomes you to our tradition
of excellence! In choosing a Quadra-Fire appliance, you
have our assurance of commitment to quality, durability, and
performance.
This commitment begins with our research of the market,
including ‘Voice of the Customer’ contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world’s most
advanced technology to achieve the optimum operation of
our stoves, inserts and fireplaces. And yet we are old-fash
-
ioned when it comes to craftsmanship. Each unit is meticu
-
lously fabricated and surfaces are hand-finished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
and Welcome to the Quadra-Fire Family
!
5700 STEP TOP ACC
CONFIDENTIAL PROPERTY OF HEARTH & HOME TECHNOLOGIES INC.
PART NAME:
DRAWN BY:
SCALE:
MATERIAL:
SHEET:
PART NUMBER:
REV:
THIS PRINT IS CHECKED AND CONTROLLED BY THE ENGINEERING
DEPARTMENTS OF HEARTH & HOME TECHNOLOGIES INC.
ECO #
DATE
BY
REV
UNLESS OTHERWISE SPECIFIED DIMS ARE INCHES[MM] & : TOLERANCES ARE: (2) PLACE DEC : ± 0.03 (3) PLACE DEC: ± 0.005 ANGLE: ± 2° FRACTION: ± 1/16
OUTSIDE MATERIAL.
NORMAL DIM & INSIDE MATERIAL.
OUTSIDE APEX
INSIDE APEX - DIMS ENCLOSED BY AN OVAL ARE CRITICAL DIMENSIONS
REVISIONS
ITEM
PART NUMBER
PART NAME
QTY
ACC WOODFIRE COMPLIANCE LABEL
This appliance has been TESTED TO AS/NZS4013 for Hardwood by Vipac Report # 30A-14-0102-TRP-361517-0 Date tested: April 2015
OVERALL AVERAGE EFFICIENCY BURNING SOFTWOOD
WHEN TESTED IN ACCORDANCE WITH AS/NZS 4012: .........................................................
65%
AVERAGE PARTICULATE EMISSION FACTOR BURNING SOFTWOOD
WHEN TESTED IN ACCORDANCE WITH AS/NZS 4013: .........................................................
1.5 g/kg
MAXIMUM AVERAGE HEAT OUTPUT BURNING SOFTWOOD:
..........................
12.7 kW
APPROVED FUEL:
...............................................................................................................
BURN ONLY HARDWOOD WITH A MOISTURE CONTENT
LESS THEN 25% (dry basis).
Wetback - All Models: .........................................................................................
Manufactured By: ...............................................................................................Hearth & Home Technologies, 352 Mountain House Road,
Halifax, PA 17032, United States of America
PERFORMANCE MAY VARY FROM TEST VALUES DEPENDING ON ACTUAL OPERATING CONDITIONS.
U.S. ENVIRONMENTAL PROTECTION AGENCY
Export stove. May not be operated within the United States
NOTE:
7038-200_R4
INSTALLATION
DATE:
BARCODE LABEL
HF
Serial No. /
N
o
de série:
Date of Manufacture / Date de fabrication:
2017 2018 2019 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
MODEL QUADRA-FIRE 5700 step top acc Freestanding Wood Stove
EXP-III Wood Burner
Page 10
7038-201G
19 January, 2018
5700 Step Top ACC Wood Burner
1. Unpack the Flue Mounted Shield, detach the three brackets and familarize yourself with the illustra-
tions.
it meets the outer shield (refer sketch). Cut along the full length of the Flue Mounted Shield on both
4. Fit the top bracket to the Flue Mounted Shield as illustrated ensuring the rear mid section of the
f both the lower outer legs from the
.
Two tabs are provided and if folded back at 90 degrees the bracket and Flue Mounted Shield will
mount lower onto the appliance.
The Flue Mounted Shield then locates into the two notches provided n bracket “5B” as illustated.
grill to be removed.
7. Using the pre-punched holes in the two tabs provided on the top bracket as guides, drill into the
GENERAL INSTRUCTIONS FOR FLUE SYSTEM
MINIMUM HEIGHT OF FLUE SYSTEM EXIT
Fig. 8
6000
3000
or less
More than 3000
600 min.
3000
increase as necessary
until nothing within
6000mm of flue top
Any nearby structure
increase from 1000mm
minimum until clear within
3000mm of flue top
