Page 30
October 27, 2011
R
Castile & Santa Fe CE Insert
7069-101B
Figure 32.2
1
2
3
4
5
6
7
8
F. Hearth Support For Standard Surround Only
Figure 33.1 - Assembled View
Item
Description
1
Front, 76mm
2
Front, 127mm
3
Cast Ring, Top & Bottom, Interchangeable
4
Side, 127mm
5
Side,76mm
6
Panel Extension, 127mm
7
Panel Extension, 76mm
8
Panel Extension, Base Plate Only
Install Sides
First
Install Front Last
Bend top and bottom tabs toward inside
NOTE: Manually
pre-shape sides before
installing
Turn right side up and attach top cast ring
Panel Extension
Alignment
Hole
Cast Trim Footer
Panel Leg
1.
Remove contents from box and lay on protective surface to
avoid scratching the paint.
2
. Lay hearth support’s front and sides face down. Bend the
tab down toward the inside.
3.
The side pieces are shipped flat. It is much easier to manually
flex the sides into a bowed position before installing.
4.
Lay 1 cast ring face up, which will become the bottom ring when
installed. Attach the 2 sides FIRST and then the front piece.
Figure 33.3.
5
. Now turn the cast ring right side up and attach the top cast
ring .
Figure 33.4.
6
. Attach the hearth support’s panel extensions.
Figure 33.5
7.
Attach cast footers.
Figure 33.6.
8
. Place the assembled hearth support under the insert.
Figure
33.7.
Figure 33.3
Figure 33.4
Figure 33.5
Figure 33.6
Figure 33.7
