Quadra-Fire 7100FP-GD-B Скачать руководство пользователя страница 16

Страница: 16 / 36

Maintenance and Service

WARNING! Hot Surfaces!
Glass and other surfaces are hot during operation AND cool

down.

DO NOT clean fireplace until it is cooled.

A. Maintenance Tasks-Homeowners

Installation and repair should be done by a qualified service technician only. The fireplace should be inspected before use

and at least annually by a professional service person.
The following tasks may be performed annually by the homeowner. If you are uncomfortable performing any of the listed

tasks, please call your dealer for a service appointment.

1. Chimney Inspection

Frequency:

As necessary; at least annually before lighting fireplace, or once every two months during heating sea

son.

By:

Homeowner/Chimney Sweep

• Confirm that termination cap remains clear and unobstructed.

• Inspect for blockages such as bird nests, leaves, etc.

• Inspect for corrosion or separation.

• Inspect for creosote and remove as needed, at least every two months during the heating season.

• Inspect the system at the fireplace connection and at the chimney top.

In the event of a chimney fire, Hearth & Home Technologies recommends replacement of the chimney and inspection of

the adjacent structure to the provisions of NFPA Level III inspection criteria.

WARNING!

Risk of Asphyxiation and Fire! Annual inspection by qualified technician recommended.

Check:

• condition of doors, surrounds and fronts

• condition of glass and glass assembly

• obstructions of combustion and ventilation air

• obstructions of termination cap

Clean:

• glass

• air passageways, grilles

Task

Frequency To be completed by

Chimney Inspection

As needed

Homeowner or Chimney Sweep

Chimney Cleaning

As needed

Chimney Sweep

Plated Surfaces Cleaning

As needed

Homeowner

4. Glass Doors

Seasonally

Glass Cleaning

As needed

6. Door Gasket

Seasonally

7. Ash Removal

As needed

8. Baffle/Blanket/Channel Protector Seasonally

Firebrick

Seasonally

This fireplace needs periodic inspection and repair for proper operation. It is against federal regulations to operate this

fireplace in a manner inconsistent with operating instructions in this manual.

Quadra-Fire • 7100 FP Owner’s Manual • 433-3600 • Rev J • 09/21/15

Содержание 7100FP-GD-B





































Результаты поиска

Содержание 7100FP-GD-B

Отзывы:

Похожие инструкции для 7100FP-GD-B

Бренды по названию

Популярные бренды

Quadra-Fire 7100FP-GD-B, Руководство пользователя

Результаты поиска

Содержание 7100FP-GD-B

Отзывы:

Похожие инструкции для 7100FP-GD-B

Бренды по названию

Популярные бренды