background image

EPA CERTIFIED WOODBURNING 

FIREPLACE

O-T  L

Tested and 

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

C

US

Model(s):

7100FP-BK-B

7100FP-GD-B

7100FP-NL-B

NOTICE: DO NOT discard this manual!

Fire Risk.

WARNING

For use with solid wood fuel only.

Other fuels may overfire and generate 

poisonous gases (i.e. carbon monoxide).

Pour demander un exemplaire en 

français de ce Manuel 

du propriétaire, visitez www.quadra-

fire.com/translations.

Owner’s Manual

Care and Operation

INSTALLER:  Leave this manual with party responsible for use and operation.

OWNER:  Retain this manual for future reference.

• 

DO NOT

 store or use gasoline or other flam

-

mable vapors and liquids in the vicinity of this 

or any other appliance.

•  DO NOT

 overfire. Overfiring will void your 

warranty.

•  Comply with all minimum clearances to com

-

bustibles as specified. Failure to comply may 

cause house fire.

   WARNING: If the information in these 

instructions is not followed exactly, a fire 

or explosion may result causing property 

damage, personal injury, or death.

WARNING

HOT SURFACES

Glass and other surfaces are hot during 

operation AND cool down.

Hot glass will cause burns.

• 

DO NOT

 touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY  SUPERVISE  children  in  same  room  as 

fireplace.

•  Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable 

materials.

•  Keep  clothing,  furniture,  draperies  and  other  flammable 

materials away.

Installation  and  service  of  this 

appliance should be performed by 

qualified personnel. Hearth & Home 

Technologies  recommends  HHT 

Factory  Trained  or  NFI  certified 

professionals.

1

Quadra-Fire • 7100 FP Owner’s Manual • 433-3600 • Rev J • 09/21/15

Содержание 7100FP-GD-B





































Отзывы: