7
February 19, 2020
7037-801B
Figure 7.1
Figure 7.2
Millennium:
1.
Remove box and 2x4 structural boards being careful
not to damage product.
2.
Using 7/16 inch socket or wrench remove one bolt
located inside front part of appliance
(Figure 7.1)
.
3.
Moving to the back of the appliance and using 7/16
inch socket or wrench remove two bolts
(Figure 7.1)
.
4. Carefully pull appliance off of pallet and put in desired
location following Hearth Pad on
and
.
F. Removal of Appliance from Shipping
Materials
2
3
Lag bolt
Lag bolt
Mounting
bracket
Step Top:
1.
Remove box and 2x4 structural boards being careful
not to damage product.
2. Using 7/16 inch socket or wrench, remove and discard
the two lag bolts from mounting brackets; one on
each side, that is attaching the appliance to the pallet
(Figure 7.2)
.
3. Carefully pull appliance off of pallet and lay appliance
on back side on a protective surface.
4. Reference
Appliance Set-Up
on
for ash
removal system, leg or pedestal attachment options.
5.
After appliance is completely assembled place in
desired location following Hearth Pad on
.
Fire Risk.
Inspect appliance and components for
damage. Damaged parts may impair
safe operation.
• Do NOT install damaged components.
• Do NOT install incomplete components.
•
Do NOT install substitute components.
Report damaged parts to dealer.
WARNING
Содержание 4300 Series
Страница 31: ...31 February 19 2020 7037 801B Date of Service Performed By Description of Service ...
Страница 32: ...32 February 19 2020 7037 801B Date of Service Performed By Description of Service ...
Страница 33: ...33 February 19 2020 7037 801B Date of Service Performed By Description of Service ...
