quadient LAN, Руководство по установке

Страница: 9 / 18

9
Manually configuring LAN communication settings
In some unique instances, the LAN settings may have to be programmed into
the IS series mailing machine in order to establish a valid connection via LAN.
To manually configure LAN settings on an IS series mailing machine for a new
install, the actions below are required. If not, the system will continue to auto-
matically start the installation wizard and forbid the configuration of the LAN
settings.
Remove the power from the system; remove the PSD (meter); plug the system
back in and wait until the system boots up.
1. When the system powers on with no PSD (meter), you will be requi-
red to clear a “boot with no PSD” message. Press “OK” to display the screen
below. Press the “Menu” button.
No stamp
No printing
Note: if there is no cartridge in the system, other messages may have to be
cleared by pressing OK.
2. Scroll down and select “ 13 Supervisor ”.
10. Application
11. Preferences
12. Cartridge
13. Supervisor
Main Menu